Maintaining and cleaning your AK47 steel magazine is essential for maximum performance. This is because an AK47 magazine is made up of several parts, including a spring, follower, and feed lips. All of these parts need to be cleaned and maintained in order to ensure that the magazine is functioning properly. If you want to buy the Ak47 steel magazine then explore this site.
The first step in maintaining and cleaning your AK47 steel magazine is to disassemble it. This is done by removing the magazine floorplate and then carefully removing the spring and follower. Once the spring and follower are removed, the remaining parts of the magazine should be inspected for any dirt, debris, corrosion, or other damage.
Image Source: Google
Once the parts have been inspected and replaced, the magazine should be thoroughly cleaned. This is done by wiping down the inside and outside of the magazine with a cloth and a solvent. This will help to remove any dirt, debris, and other buildups that may have accumulated on the parts.
In order to prevent corrosion and other damage to the AK47 steel magazine, a lubricant should be applied to all of the parts. This will help to keep the moving parts functioning properly and prevent any wear and tear.
Finally, the magazine should be reassembled and tested. All of the parts should move freely and the magazine should not fail to feed or jam. If any problems are encountered, the magazine should be disassembled and inspected again.